January 20, 2022

5 Fixes To Resolve Chromecast Update Stuck At 0% issue

5 Fixes To Resolve Chromecast Update Stuck At 0% issue


Unable to update your Chromecast with the latest firmware because it gets stuck at 0%?

Don’t worry this blog will help you out to find the best solution to troubleshoot Chromecast update stuck at 0% issue.

How To Fix Chromecast Update Stuck At 0% Issue?

Fix 1# Try Simple But Essential Steps

Give it a try to the following steps:

Go ahead and give these steps a try, and let me know if they help out:

  • Confirm that the device is plugged into the power outlet, and is not powered by the TV.
  • Make sure that the Chromecast device is within 15 feet from the router.
  • Forget the network by factory resetting the device, or using the Google Home app.
  • Reboot the router.
    If you are able, try setting up the Chromecast using another device, such as a tablet or phone.

Fix 2# Correct The Router Configuration Setting

Sometime the issue originates due to improper router configuration setting. As in the Chromecast support site it is clearly mentioned that it supports 802.11ac network. So if you are using an 802.11b/g/n network along with the Comcast router then it’s time to take a peek to the configuration.

As it is seen logging to the router is very easy you just need to open up the browser and then type In the opened page assign the user name as “admin” and default password as “password”.  If till now you don’t done this, then setting new password for security concern make take time.

The setting helps you to get the Chromecast Ultra; this updating phase was just to configure the security mode into WPA2-PSK (AES). Whereas, it was previously set to WPA2/WPA with TKIP/AES.

After making these changes in the setting reboot the Chromecast and this time update will get done perfectly.

Now you can reconnect all your tablets, phones and laptops connected to Wi-Fi network after modifying the security mode.

Fix 3# Observe How Chromecast Is Updating Its Firmware

Here’s what to expect while Chromecast is updating its firmware:

  • You will see the update progress on Google Home App.
  • Its update status is clearly visible on the TV.
  • If your Chromecast is receiving the update, then on the side section of the Chromecast LED light blink.
  • The whole process of update takes around 10 minutes.
  • Reboot the Chromecast device by removing it from your power source. After the passage of few minutes, plug it back and then update will take restart.
  • Chromecast is not available for casting meanwhile the update process. Wait till the update gets over before attempting for the casting process.

Fix 4# Create A New Home Environment

Another option that you try to fix Chromecast update stuck at 0% error is by creating the new Home environment.

In this whole procedure we will create a test profile on second device and after that add the Chromecast to this profile. Now install the firmware update on this new profile and move your Chromecast to the original profile.

Here is the complete step to perform this task:

  • Select the second device (iPhone or Android) and then quickly install the Google Home App in that device.
  • Ensure that it should be over the same network just like your Chromecast and the first device.
  • Start your Home app and make a tap over the plus sign present on the top left corner.
  • Choose Create New Home option and assign any name to it. Hit the Continue option.
  • After getting into this profile, make a tap over the plus sign present on the top left corner and choose the Set up Device.
  • Now it’s time to choose your New Device and then follow the on-screen instructions for adding up your Chromecast device.
  • It’s time to install the Chromecast firmware update and check whether the Google Chromecast update stuck at 0% error is resolve or not.
  • After the successful installation of the firmware update, you can now transfer your Chromecast again to the original profile.
  • Delete your test profile by following this step: Settings > Delete this home.

Fix 5: Factory Reset Chromecast

If in case none of the above mentioned method works to resolve the Chromecast update issue then should try the Chromecast factory reset option.

Mainly this factory resetting task of Chromecast can be done in two different methods:

  • First through the device itself.
  • Secondly through Google Home app.

Complete detail about each of these solution are given here choose the one that goes well with your requirement.

Method 1: Reset Chromecast From Device Itself

  • Start with, connecting the Chromecast with your TV.
  • Keep pressing the button present on the side section of your Chromecast at least for few seconds.
  • At first LED will blink in orange color but once color changes to white, leave the button.
  • Resetting the Chromecast is over now and this process will restart your device from the scratch level.

Method 2: Reset Chromecast Via Google Home App

  1. Start your Google Home App and then from the list choose the Chromecast device.
  2. Now tap to the Settings button and then the overflow icon which is present at the top right corner.
  3. From the appearing menu, choose the Factory Reset option.
  4. At last hit the Factory Reset button and then wait until the whole process gets over.
  5. After completing this procedure you will see that firmware will smoothly take update and you don’t need to go through any Chromecast update stuck at 0% issue.

FAQ (Frequently Asked Question):

How Long Does It Take For Chromecast To Update?

This process of Chromecast update totally consumes 10 minutes. If it is taking more time than the expected one check out the LED light status for checking the device updating status. Chromecast will show red light once it start receiving the update. If required, you can also reboot the Chromecast to automatically for restarting your update.
The Chromecast should pulse red while it receives the update. If needed, you can reboot the Chromecast to automatically restart the update.

Why Update Is Taking So Much Of Time To Get Installed On The TV?

At the time of installation, blue screen starts appearing on the TV along with the spinner and percentage of progress in yellow color just beside it. Wait until the whole installation process gets over.
Once your Chromecast has finished updating, you will get a ‘Ready to Cast’ message on the TV and the Chromecast will also be shown in the device list of the Google Home app.

Why I Am Getting The ‘Downloading/Fetching Update’ Message Appears For A Long Time?

If your whole update process is consuming long time then chances are high that your Internet speed is very slow. Apart from this, if your download is stuck at some percentage from long time then it means something goes wrong in the router configuration settings. Due to this your download process is going n very slow.

Final Words:

In this article, I have provide ample amount of information regarding ways to fix Chromecast update stuck at 0% issue.

All the listed solutions are well tried and tested one to resolve fix Chromecast update failed problem.

I am pretty sure that after following these fixes you can again be able to use Chromecast without any hassle.

If this article seems helpful to you then do share this post. Besides this, if you have any queries related to this particular one, then don’t hesitate to share with us. as you can connect with us on our Facebook page.

Thank you…!

Click Here To read Original Story